Transform Your Bath Space - Installation Guide For New Shower Units

Request Your Service

The article author is making several great pointers on How to Install a Freestand in general in this content in the next paragraphs.

A successful shower setup calls for careful preparation and a lot of job. In most cases, you will need to do 3 types of tasks: mounting wall surfaces, installing the plumbing, and completing wall surfaces.

Preparation

First of all, you have to choose the kind of shower that you desire to mount. It is essential to establish whether the picked shower is capable of dealing with specific systems as well as can manage a safe level of water with the central heating boiler. The majority of shower devices nowadays are developed to be flexible to various water stress (such as saved hot water as well as chilly keys).
It is additionally important to take into consideration the water stress as well as the preparation of the piping and also water drainage for the shower

Different Kinds Of Shower Units

Push-on Mixer: The pipe and also spray parts of the push-on mixer shower unit can be connected to the bath tap according to your demand, as well as the water temperature level can be readjusted via the taps. Push-on mixers are cheap and incredibly easy to set up. Nevertheless, although the hose pipe link is basic, it is conveniently displaced. In addition, it is inconvenient to readjust the temperature level.

Bath/Shower Mixer: The tube and also spray of this sort of shower are incorporated with a bathroom mixer faucet, and also the temperature level can be readjusted via the bathroom faucets. It is a really economical choice as well as no additional plumbing is included. Nevertheless, the bath/shower mixers also struggle with troublesome temperature control options.

Manual Mixer: The hose and spray of a hand-operated mixer shower device belong of the wall surface system as well as the hot and cold water supplies are connected to a single shutoff The temperature level and also stress of the water are managed with either one or a variety of knobs (in extra pricey showers). Although temperature level control is much easier in manual mixer types, they are more pricey than the formerly pointed out mixers. They also require added plumbing of cold and hot water system pipes.

Thermostatic Mixer: The tube and also spray of this shower kind are a part of the wall device as well as the hot and cold water supplies are attached to a solitary valve here also. It is total with a built-in stabiliser to self-adjust the water temperature level and also to avoid it from becoming also warm. One of the biggest benefits of a thermostatic mixer shower type includes hassle-free temperature level control. However, it is one of the most costly of the different mixer alternatives.

Power Shower: A power shower is a single unit having a powerful electrical pump that is capable of altering both the water stress as well as temperature. This kind of shower can be fitted if there is supply of water from a cold water tank as well as a hot water cyndrical tube. A power shower makes the adjustment of both stress and also temperature level easy. On the other hand, it disagrees for water heated straight by the shower or where the water is supplied by a mix boiler under keys pressure.

Electric Shower: An electric shower is plumbed right into a mains cold water supply as well as it warms the water electrically. It is very important to keep in mind that for this shower type to be mounted, the mains stress needs to be a minimum of 0.7 kg/sq cm (10lb/sq in). The system allows the temperature level and pressure to be readjusted through a handle. Models with temperature stabilisers are much better as they stay untouched by other faucets elsewhere being used within the house. A major downside of electrical showers is that the control knob just allows for the choice of heats at less pressure, or reduced temperatures at a greater stress. This is troublesome in the winter season when the spray is frequently weak as well as the keys water is colder. Nevertheless, this trouble is tackled in some designs which are available with a winter/summer setting.

Technique

Depending upon the sort of shower you desire to install, the shower head should either be suited order to avoid its contact with the water in the bath listed below or the base tray, or it has to have a check valve.
Before beginning, it is suggested to mark the positions of the shower head as well as control, as well as to intend the pipe-work involved. Furthermore, the drain system to get rid of the waste water will need to be intended. Both placements of the cable path as well as the shower button will certainly also need to be thought about if a rapid or electrical shower device is being installed.
Use the direction overview given with the shower device to fit the shower control.Before suitable the pipelines that will provide the water to the shower system, it is important to cut off the supply of water. In order to safeguard the pipelines, they must be provided a water-proof covering as well as additionally fitted with separating shutoffs. The pipelines can after that be hidden into the wall and plastered over to neaten the overall look.
Fit the base tray, shower head, and fittings.
Connect the main shower control to the pipes that will be supplying the water (This may require a female screw thread adapter).
Reconnect the supply of water as well as test the pipes for any type of leaks, as some may need tightening.
If you are installing an electric shower, remember to switch off the electricity supply prior to making any type of electric connections. When these connections have been made (there should be guidance within the instruction manual), the power supply can be switched back on.

Readjusting Water Stress to Match Your Shower

The cold water storage tank can be raised to a higher height (sometimes just 150mm (6inches)) by installation a solid wood support below it - perhaps made up of struts as well as blockboards. If you select this option, the main and circulation pipelines will also have to be elevated to fulfill the new height of the reservoir.
Conversely, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever type is chosen, it must be attached right into the power supply in order to operate.

Piping and Water drainage

It is best to utilize 15mm diameter supply pipelines, and also make the runs to the shower as brief as well as straight as possible so as to keep maximum pressure and also reduce heat loss. Additionally, by reducing using elbows for pipeline edges, you can decrease the resistance in the circulation of the water system. You can achieve this by flexing the pipelines instead.

The Majority Of Typical Mistakes

Going against or ignoring neighborhood code limitations.

Using pipelines that are as well tiny.

Connecting copper to galvanized without using a brass or dielectric suitable between both.

Not utilizing tape or pipe substance at threaded joints.

Not leveling your components when mounting them.

Not setting up an air gap filling up for fixtures.

Reducing supply stub outs too brief to install the shutoff valves onto after the finished wall surface is in area.

Not correctly straightening tubing right into fittings or quit valves. (Compeling the nut onto the compression ring at an angle when the tubing goes to an angle will trigger a leak.).

When transforming the water back on in your house, always run the outdoors hose pipe shutoff or flush your bathrooms to bleed dust and also air from the lines. This debris can create problems in your sink taps and various other plumbing trim.

Shower enclosures for bathrooms

It makes your bathroom look like a luxury suite:

Installing a new shower cubicle in your bathroom is an excellent way to make it look like a luxury suite. Nothing says modern elegance like a glass shower enclosure. Made with 8 mm easy clean glass, Jauqar shower enclosures come in varied colors and sizes to fit perfectly with your existing bathroom size & decor. The high-quality enclosures come with concealed fixings and silent cushion closing to ensure a great showering experience.

Adds style to your bathroom:

Shower cubicles are one of those shower products that can make your bathroom look modern, wide, and visually appealing. Jaquar shower enclosures are available in various styles, so you can find the one that fits your bathroom's overall design. Whether you prefer rectangular enclosures or fancy curved designs, Jaquar has it all.

Enhances Personal Hygiene:

Waking up in the morning to a filthy, muddy bathroom can ruin your day. Jaquar shower enclosure helps keep your bathroom clean and hygienic. A shower enclosure helps keep the water inside and off your bathroom flooring. Allowing water to spill out on a hard surface can lead to mold, mildew, and build-up on the tiles and other flooring surfaces, which can be unhygienic and unattractive.

As all Jaquar shower enclosures are built to conform to the highest safety standards, you can be rest assured that they are completely watertight. This means you won't have to worry about leakages damaging your bathroom floor or ceiling—or worse yet, creating mold and mildew.

Elevates your shower experience:

A great shower combines many factors - optimum water pressure, apt water temperature, and great aesthetics during and after the shower. After all, who loves to clean the dirty floor just after a relaxing shower? With Jaquar shower enclosures, you can improve your experience by keeping the water within a specific area, so there is no cleaning post your shower. Offering style and function, our shower enclosures make your everyday life easier.

Space-effective:

Shower enclosures give you more space without sacrificing style. It can be a challenge finding both in today's modern bathroom, but a Jaquar shower enclosure will provide you with both. Unlike big, bulky shower enclosures, Jaquar's shower enclosures come in standard sizes that are good enough to fit any space- from large bathrooms with walk-in closets to bathrooms that need extra storage space. You can also customize the size as per your preference.

Ensures safety with impressive safety features:

Jaquar shower enclosures are designed with the highest safety standards. They come in different sizes and designs, along with toughened safety glass, high-quality hinges, and locking mechanisms that help keep you safe from injury while allowing you to feel at ease when taking a relaxing shower. A secure enclosure means no chance of slipping on wet bathroom floors.

https://www.jaquar.org.uk/blog/why-shower-enclosure-are-important

We hope you enjoyed our post about How to Install a Direct-to-Stud Shower Enclosure. Thanks for taking a few minutes to browse our content. If you please take a moment to share this blog if you enjoyed reading it. Thank-you for taking the time to read it.

Maintenance Sign-Up